Patmarlins POCKETLuberBP™ Bullet Luber…!

 

ALL4PL

Add your favorite bullet lube in the lube reservoir, insert your muzzleloader cast bullets, black powder cartridge cast, CAS shooting or other cast bullets for an economical pressure feed tool to lube your bullet grooves, plus makes a handy holder in the field.

Calibers available so far:

58 Cal .578″

54 Cal .550″45P50PouchPL

50 Cal .5035″

45R (rifle) Cal .460″ 

45P (pistol) Cal .454″

44 Cal .431″

32 Cal .323″

More to come soon…

Domestic Shipping- $6.80 for up to five (5) lubers within 1-2 days USPS Mail

Latest Customer Comments

Pat, I got mine yesterday and already put it to use, it works exactly as I’d hoped it would! Thank you very much!”

“After seeing the pictures, I personally feel this will be far superior to the old T/C Luber. Thanks Pat for taking the time….IMO, you may well be onto something good here, especially for those of us who like to play around with fast-twist muzzleloaders!”

“Your luber arrived Pat, it works as advertised. The Lyman 395gr Plains bullets I cast, fit perfectly. I do believe you’ve made another tool, Thank You”


“Now, when it comes to looks……this dog will definitely hunt!  Plan on running some .50 Maxi-Ball through it this weekend. Of course that will be the true test, but right now I am pleased as Punch with this neat little tool.”

“I just got one of Pat’s Luber gizmos. As expected, it’s a work of art.”

Works with all soft and hard lubes including soft bore butter. Can be warmed up for the hardest lubes.

PLPB3

 

P1020220

“I have the .45(R), .50, + .54 lubers and love ’em. Lubes the boolits (T/C maxiballs) well and I plan to use them as my 21st century boolit boards when hunting. If I load four in the luber and have them lubed, I can reload the reservoir with more lube and have a couple more unlubed boolits in the bag ready for the next volley. I’ve never used more than two boolits when hunting for the day, but you never know when the deer may mass up and attempt to overrun my position. It’s always been a pleasure to deal with Pat.”

PLPB7

 

HardLube2

 

HardLube1

 

HardLube3

 

HardLube6

LubedFive2

 

lubedFive1

Calibers Sizes In Stock:

58 Cal .578″

54 Cal .550″

50 Cal .5035″

45R Cal (rifle) .460″ 

45P Cal (pistol) .454″

32 Cal .323″

Domestic Shipping- $6.80 for up to five (5) lubers within 1-2 days USPS® Mail

More to calibers to come soon…

I.D. tolerances are within +/- .001″


 

Operation Notes…

Load lube reservoir and insert cast bullets. Nose towards top (the top has the caliber engraved). Turn in thumb screw to feed lube grooves. Add lube until it bleeds out excess through end bleed hole to completely fill your POCKETLuberBP™.

Wipe off excess lube on your undersize bullets if needed. Use lead softer than Aluminum for larger bullets that will be sized during insertion. Choose to insert from the top or from the bottom.

If you desire to keep a larger, upper driving band diameter, simply size the base lube grooves only.  The depth inserted can also dictate what part of your bullet you wish to lube.

Works with all hard and soft lubes. Unit can be warmed for harder lubes.

Please email any suggestions you may have.

 
 

FAQ-

Is that clear anodizing?
No. They are T6061 aluminum. Non anodized. Thanks-


Do you anticipate having a .314-.315 for .32 revolver and .303 British, or a .430-.431 for .44 Magnum rifles and revolvers?
Yes. 


Pat I see a string of lube at the end of the device.. Assuming this is to signal lube has made it through all channels?
Yes. That is a bleed hole. So you can just lube partial cavities, but if you have all the cavities loaded up, the bleed hole lets you know it’s full.


How much lube does it hold?
Don’t know how much lube it holds. Takes about 1.5 fills to lube 370 gr TC maxies, but then the whole thing is full for more loads.


How do you load stick lube into it?
That green lube in the photo is hard stick lube. Simply push it in from the edge- moving across the end. Pack it in by scraping the end and forcing it in. Went in easily. You can heat the block and the lube a little as well. Uses all lubes including very soft bore butters, and very hard lubes.

See what customers are saying about the POCKETLuberBP™

“I have been hunting with a muzzleloader for about 33 years and this is the greatest thing since sliced bread. I have tried everything and I am tired of trying to do it with my fingers, especially the stick lube.” JC

“Your luber arrived Pat, it works as advertised.

The Lyman 395gr Plains bullets I cast, fit perfectly. The bands measure .503″, The driver at .504″. The NOE bullets I referenced earlier in this thread, are too tight for full insertion. BUT, once I do some further load development with this particular mould, I may hone-out two of the cavities to accept the NOE bullet, or I may play with sizing the NOE as accuracy dictates.

I do believe you’ve made another tool, Thank You”
 
“Pat, Luber came yesterday and I just used it. Works great!! Thanks Charlie”
“Just wanted to let you know that I received my Luber and it is really slick! I tried it with some hard-core nubile wax and Maxie balls and it works like a charm you are a genius congratulations!” Susan M.”
 
“Pat, I got mine yesterday and already put it to use, it works exactly as I’d hoped it would! Thank you very much!”
 

 

“After seeing the pictures, I personally feel this will be far superior to the old T/C Luber. Thanks Pat for taking the time….IMO, you may well be onto something good here, especially for those of us who like to play around with fast-twist muzzleloaders!”

 

“Your luber arrived Pat, it works as advertised. The Lyman 395gr Plains bullets I cast, fit perfectly. I do believe you’ve made another tool, Thank You”

 
“Now, when it comes to looks……this dog will definitely hunt!  Plan on running some .50 Maxi-Ball through it this weekend. Of course that will be the true test, but right now I am pleased as Punch with this neat little tool.”

“I just got one of Pat’s Luber gizmos. As expected, it’s a work of art.”

 

“I have the .45(R), .50, + .54 lubers and love ’em. Lubes the boolits (T/C maxiballs) well and I plan to use them as my 21st century boolit boards when hunting. If I load four in the luber and have them lubed, I can reload the reservoir with more lube and have a couple more unlubed boolits in the bag ready for the next volley. I’ve never used more than two boolits when hunting for the day, but you never know when the deer may mass up and attempt to overrun my position. It’s always been a pleasure to deal with Pat.”

 

Choose PayPal, all credit cards, or check and money order payment.

V MC Amex DiscPayPalverification_sealpaypal_secure_213wx37h

Accept Credit Cards Online

Patmarlin, Patmarlins, Checkmaker, Rockdock, PocketLuber, Pocket Luber, Luber, bullet luber, bullet lube, Thompson Center, sizing die, TC, lyman sizing die, rcbs sizing die, star sizing die, muzzeloader, conical, minie, round ball, black powder, LEE REAL bullet, REAL mold