By Ben Hays

The usual formula :

50% beeswax
30% Red, Tacky Lucas High Temp Grease
10% Johnson’s Paste Wax
5% Dexron II or Dexron III Trans. Fluid
5% STP Oil Treatment

DO NOT ATTEMPT TO MIX THESE INGREDIENTS TOGETHER INSIDE YOUR HOME !

Here is the Lucas Red and Tacky about to be melted :

Once all the components above are melted and mixed together, they were poured into a silicon baking pan.

When the lube reached room temp., I moved the silicon baking pan to the deep freezer for 1 hour.

The Ben’s Red lube ingots came out of the mold with no problems at all :

Here are links that should answer any questions shooters might have about making Ben’s Red. *My comments & experiences and those who have experienced problems ( and the advice to correct their problems ) are included in the links below *:

http://castboolits.gunloads.com/show…light=bens+red

http://castboolits.gunloads.com/show…light=bens+red

http://castboolits.gunloads.com/show…light=bens+red

http://castboolits.gunloads.com/show…light=bens+red

Considering the continued rising cost of bullet lubes at MidWay,see link below:

http://www.midwayusa.com/product/712…e-stick-hollow

This lube that I made today will provide a lot of clean & accurate cast bullet shooting for me for many months to come.

I melt my lube and pour it into my lube sizers. These lube ingots can be cut easily with a utility knife and added to my lube pouring ” soup can “.

Please watch the You Tube video of liquid lube being poured into my two lube sizers.

http://www.youtube.com/watch?v=GQ5n6…ature=youtu.be

Thanks,
Ben